Homothermal Servo Motor Encoder Controlled Free-Debugging & Maintenance Flap Gate SJSDZY-14

Catalogue for Swing SJSDZB10 & flap gate SJSDZY-14.pdf

Brief Introduction

Compared with traditional flap gate, SJSDZY-14 adopts all new permanent magnet
synchronous servo motor and encoder control system, by which the device is
suitable with voltage ranges from AC175--300W, and the life cycle is prolonged up
to 5 million times; Sensor or mechanical position is not necessary any more, the
structure is more simply, thus maintenance cost is cut down too much. As all
operations are controlled by the encoder program, maintenance is much easier
and mechanic failures are reduced largely. As motor keeps homothermal all the
time, it is able to work extreme environment.

Features

1. Reliable, low noise, smooth operation and long life cycle
2. Configurable open speed to meet different requirements
3.With failure self-diagnosis and alarm prompt function, convenient to us and
maintenance.
4. Multi-operation models optional
5. Anti-pinch: In the process of reset, the motor stop working in stipulated time if the
arm is blocked. Reset again after default delay time and the force is <=2kg
7. Able to rapidly transform opening/closing amplitude by PLC automatic learning function

8. PLC positions door location accurately, no sensor and mechanic position needed
9. Automatic reset: In stipulated time, if no body passes after door opens, the flap gate
will close automatically
10. Anti-tail:many persons pass through the gate at one time is not acceptable
11. Sunscreen, cold-resistant, heat-resistant, water-proof design, suitable for indoor
12. Autolock function: no mechanical auto lock needed, by which improve reliability and life cycle.
No mechanical noise
13. PLC swing position signal output positions the swing location real time and give out alarm signal
14. Servo driving control: wide regulating range, high position accuracy, fast speed, smooth operation,
low noise, high torque at low speed

Parameters